OHE & PSI DESIGNS
IF YOU WANT TO DOWNLOAD OR ACCESS THIS PAGE SO LOGIN
CIVIL FOLDER -1 REF -2
CANTILEVERS DESIGN
9.50M STANDARD TRACTION MAST K SERIES
9.50M STANDARD TRACTION MAST FABRICATED WITH BATTEN PLATES B SERIES
EMERGENCY OHE MASTS ON SLEEPERS
EMERGENCY OHE MASTS ON SLEEPERS WITH DETAILED BASE CONNECTIONS
EMERGENCY OHE MASTS ON SLEEPERS GENERAL ARRANGEMENT
DIMENSIONS OF BOLT, NUTS, LOCK NUTS ON 25KV TRACTION
16 mm DIA J BOLT FOR AC TRACTION
WASHERS AND SPLIT PINS FOR 25 KV AC TRACTION
9.5M LONG STANDARD TRACTION MAST WITH BATTEN PLATES TM SERIES
9.5M LONG STANDARD TRACTION MAST TM SERIES
CIVIL FOLDER 04 REF 2
N TYPE PORTAL SHORT LENGTH 9.49M FOR LOW LEVEL PASSSENGER PLATFORM
N TYPE PORTAL SHORT UPRIGHT OF LENGTH 9.185 FOR HIGH LEVEL OF PASSENGER PLATFORM
N TYPE OF PORTAL SHORT UPRIGHT OF LENGTH 9.945 M FOR RAIL LEVEL PASSENGER PLATFORM
N TYPE OF PORTAL SHORT UPRIGHT OF LENGTH 8.880 M FOR GOOD PLATFORM
BLACK WEIGHT OF G TYPE PORTAL FOR DRG NO RE/31/0886/67
N TYPE PORTAL GENERAL ARRANGEMENT
N TYPE PORTAL ROD LACED DETAILS OF UPRIGHT PART – “A”
N TYPE ROD LACED PORTAL DETAILS OF END PIECE TOP BOOM PART -B NORMAL L 5380
N TYPE PORTAL ROD LACED DETAILS OF STANDARD CENTRAL PIECES OF TOP BOOM
N TYPE PORTAL DETAILS OF SPLICING AND COVER ANGLES PART -D
CIVIL FOLDER 3 REF 1
TWO TRACK CANTILEVER STRUCTURE TTC DETAILS OF KNEE PLATE
TWO TRACK CANTILEVER STRUCTURE TTC DETAILS OF UPRIGHT
TWO TRACK CANTILEVER STRUCTURE TTC DETAILS OF 8M BOOM
TWO TRACK CANTILEVER STRUCTURE TTC DETAILS OF 5.5M BOOM
STANDARD R TYPE PORTAL ROD LACED
STANDARD R TYPE PORTAL ROD LACED UPRIGHT PART A
DETAILS OF R TYPE PORTAL ROD LACED TOP BOOM PART B
DETAILS OF K TYPE PORTAL ROD LACED CENTRAL PIECE OF TOP BOOM PART C
STANDARD R TYPE PORTAL ROD LACED DETAILS OF SPLICING AND COVER ANGLE PART D
DETAILS OF R TYPE PORTAL ROD LACED KNEE BRACING PART E
TWO TRACK CANTILEVER STRUCTURE TTC GENERAL ARRANGEMENT
CIVIL FOLDER 04 REF 2
O TYPE PORTAL ROD LACED DETAILS OF UPRIGHT PART A
STANDARD ARRANGEMENT OF SUPPORTING CANTILEVERS ON THE BOOM OF PORTAL AND TTC SPS DETAILS
STANDARD ARRANGEMENT OF SUPPORTING CANTILEVERS ON THE BOOM OF TTC AND PORTALS GENERAL ARRANGEMENT
STANDARD ARRANGEMENT OF SUPPORTING CANTILEVER ON THE BOOM OF PORTAL AND TTC SPS DETAILS
O TYPE PORTAL GENERAL ARRANGEMENTS
O TYPE PORTAL ROD LACED WITH 1 IN 50 CAMBER
O TYPE PORTAL ROD LACED DETAILS OF END PIECE OF TOP BOOM PART B
O TYPE PORTAL ROD LACED DETAILS OF CENTRAL PIECE OF TOP BOOM PART C
O TYPE PORTAL DETAILS OF SPLICING AND COVER ANGLE PART D
CIVIL FOLDER 05 REF 01
THREE LEGGED N TYPE PORTAL ROD LACED GENERAL ARRANGEMENTS
THREE LEGGED N TYPE PORTAL ROD LACED DETAILS OF CENTRE UPRIGHT PART F
SPECIAL BFB PORTAL ROD LACED DETAILS OF END PIECE OF TOP BOOM PART B
SPECIAL BFB PORTAL FOR 5 TRACKS GENERAL ARRANGEMENTS
SPECIAL BFB PORTAL DETAILS OF UPRIGHT PART A
SPECIAL BFB PORTAL ROD LACED KNEE BRACKET PART E
THREE LEGGED BFB PORTAL
THREE LEGGED BFB PORTAL CENTRAL UPRIGHT PART F
P TYPE PORTAL GENERAL ARRANGEMENT DETAILS OF UPRIGHT AND END PIECES
CIVIL FOLDER 05
VOLUME CHART AND EQUIVALENT CHART OF PURE GRAVITY FOUNDATIONS
VOLUME AND EQUIVALENT CHART OF FOUNDATIONS FOR DRY BLACK COTTON SOILS ONLY NBC TYPE
CHART FOR PORTAL FOUNDATION
DETAILS OF MASTS FOR SUPPORTING ISOLATORS INSIDE SWITCHING POST
VOLUME CHART AND EQUIVALENT CHART OF FOUNDATIONS NG TYPE
DETAILS OF OHE FOUNDATIONS IN SOFT ROCK
DETAILS OF OHE FOUNDATIONS IN HARD ROCK
SHORT BORED POLE FOUNDATION OF TRACTION MAST
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST
TYPICAL DESIGN FOR NEW PURE GRAVITY FOUNDATIONS
TYPICAL DESIGN FOR SIDE GRAVITY FOUNDATIONS
10.850M STANDARD TRACTION MAST (B SERIES)
DETAILS OF SPECIAL BOOM HORIZONTAL FOR CLEAR SPAN OF 40M TO 60M FOR 3 NOS DD LINE FOR CHITPUR TERMINAL OF E. RAILWAY
SPECIAL PORTAL FOR CLEAR SPAN OF 40M TO 60M FOR 3 NOS DD LINE FOR CHITPUR TERMINAL OF E RAILWAY
SPECIAL PORTAL FOR CLEAR SPAN OF 40M TO 60M FOR 3 NOS DD LINE FOR CHITPUR TERMINAL OF E RAILWAY NOMINAL LENGTH 6.0M TO 13.0M
DETAILS OF COVER ANGLE FOR SPECIAL PORTAL OF 40M-60M FOR CHITPUR TERMINAL E RAILWAY
DETAILS OF SPECIAL END PIECES FOR SPECIAL PORTAL OF 40M – 60M FOR CHITPUR TERMINAL E. RAILWAY
CIVIL FOLDER 06
BLACK WEIGHTS OF STANDARD “N” TYPE PORTALS
BLACK WEIGHTS OF STANDARD “O” TYPE PORTALS
G-TYPE PORTAL SPECIAL UPRIGHT AND END PIECE
STANDARD PORTALS(N,O,R,P,G& DOUBLE BFB TYPES)
STANDARD ARRANGEMENT OF SUPPORTING CANTILIVERS ON THE BOOM OF PORTALS AND TTC
CIVIL FOLDER 07 REF 1
ARRANGEMENT OF TREATING BLACK COTTON SOIL AT FOUNDATION LOCATION
TYPICAL NUMBER PLATE FOR INTERRUPTER AND DOUBLE POLE ISOLATOR
HEIGHT GAUGE UPTO CLEAR SPAN OF 7.3M
HEIGHT GAUGE UPTO CLEAR SPAN OF ABOVE 7.3M UPTO 12.2M
CIVIL FOLDER 07 REF 2
TWO TRACK CANTILEVER STRUCTURE (TTC-17) DETAILS OF UPRIGHT
TWO TRACK CANTILEVER STRUCTURE (TTC-17) DETAILS OF BOOM
TWO TRACK CANTILEVER STRUCTURE (TTC-17) SPS DETAILS
TWO TRACK CANTILEVER STRUCTURE (TTC-17) DETAILS OF KIIEE PLATE
TWO TRACK CANTILEVER STRUCTURE (TTC-17) GENERAL ARRANGEMENT
“O”TYPE PORTAL SHORT UPRIGHT OF LENGTH 10.035M FOR RAIL LEVEL PASSENGER PLATFORM ONLY
“O”TYPE PORTAL SHORT UPRIGHT OF LENGTH 9.275M FOR HIGH LEVEL PASSENGER PLATFORM
“O”TYPE PORTAL SHORT UPRIGHT OF LENGTH 8.970M FOR GOODS PLATFORM
“O”TYPE PORTAL SHORT UPRIGHT OF LENGTH 9.580 FOR LOW LEVEL PASSENGER PLATFORM ONLY
CIVIL FOLDER 8 REF 2
STRUCTURAL LAYOUTS OF 132/25KV TRACTION SUB STATIONS
STRUCTURAL LAYOUT OF 132KV/25KV TRACTION SUBSTATION-1
DETAILS OF BEAM OF 132KV/25KV TRACTION SUBSTATION
DETAILS OF TOWER T1 OF 132KV/25KV TRACTION SUBSTATION
DETAILS OF TOWER T2 OF 132KV/25KV TRACTION SUBSTATION
EXTENSION OF TOWER T1 FOR 132KV/25KV TRACTION SUBSTATION
EXTENSION OF TOWER T2 FOR 132KV/25KV TRACTION SUBSTATION
FOUNDATION & SUB DETAILS FOR TOWER T1 & T1 EXTENSION FOR 132KV/25KV TRACTION SUBSTATION
FOUNDATION & STUB DETAILS FOR TOWERS T2 AND T2 EXTENSIONFOR 132KV/25KV TRACTION SUBSTATION
DETAILS OF BEAM B2 AND COLOUMN C1 FOR 132KV/25KV TRACTION SUBSTATION
CIVIL FOLDER 09 REF 2
DETAILS OF FOUNDATIONS OF 132KV/25KV TRACTION SUB STATION TSS STRUCTURES
TYPICAL CABLE TRENCH AND FOUNDATION LAYOUT OF 132KV/25KV SUBSTATION
FOUNDATIONS AND STUB DETAILS OF TOWERS T1 EXTENSION AND T2 EXTENSION FOR 132KV/25KV TYPE VI SUBSTATION ONLY
DETAILS OF BAFFLE WALL AT TRACTION SUBSTATION
DETAILS OF RCC BAFFLE WALL AT TRACTION SUBSTATION
TRANSFORMER OIL DRAINAGE ARRANGEMENT AT TRACTION SUBSTATION
LIFTING FRAME OF 13.5MVA TRANSFORMER CORE IN TRACTION SUBSTATION
LIFTING FRAME FOR 13.5MVA TRANSFORMER CORE IN TRACTION SUBSTATION
LIFTING FRAME ARRANGEMENT FOR 13.5MVA TRACTION TRANSFORMER AT TSS
LIFTING FRAME GENERAL ARRANGEMENT FOR 13.5MVA TRACTION TRANSFORMER
PART LAYOUT OF FOUNDATIONS AND CABLE TRENCH FOR 25KV FEEDER BAY FOR YARD/ELECTRIC LOCO SHED
PART LAYOUT OF FOUNDATIONS CABLE TRENCH FOR SHUNT CAPACITOR BAY
CIVIL FOLDER 10 REF 1
LAYOUT OF TYPICAL CABLE TRENCH OF 220KV/27KV TRACTION SUBSTATION
STRUCTURAL LAYOUT OF 220KV/27KV TRACTION SUBSTATION TYPE-1
LINE DIAGRAM OF STRUCTURAL LAYOUTS FOR 220KV/25KV TRACTION SUBSTATION
LAYOUTS OF TYPICAL CABLE TRENCH OF 220KV/25KV TRACTION SUBSTATION
DETAILS OF BEAM B4 FOR 132KV/25KV TRACTION SUBSTATION
CONTROL ROOM FOR TRACTION SUBSTATION RCC DETAILS
FOUNDATIONS FOR TOWER T1 AND T1 EXTENSION FOR 132KV/25KV TRACTION SUBSTATION FOR ZEBRA CONDUCTORS
FOUNDATIONS FOR TOWERS T2 AND T2 EXTENSION FOR 132KV/25KV TRACTION SUBSTATION FOR ZEBRA CONDUCTORS
FOUNDATIONS FOR TOWER T1 EXTENSION AND T2 EXTENSION FOR 132KV/25KV TRACTION SUBSTATION TYPE VI FOR ZEBRA CONDUCTORS
CONTROL ROOM FOR TRACTION SUBSTATION
CIVIL FOLDER 11 REF-1
STRUCTURAL LAYOUTS OF 132/25KV TRACTION SUB STATIONS
STRUCTURAL LAYOUT OF 132KV/25KV TRACTION SUBSTATION-1
DETAILS OF BEAM OF 132KV/25KV TRACTION SUBSTATION
DETAILS OF TOWER T1 OF 132KV/25KV TRACTION SUBSTATION
DETAILS OF TOWER T2 OF 132KV/25KV TRACTION SUBSTATION
EXTENSION OF TOWER T1 FOR 132KV/25KV TRACTION SUBSTATION
EXTENSION OF TOWER T2 FOR 132KV/25KV TRACTION SUBSTATION
FOUNDATION & SUB DETAILS FOR TOWER T1 & T1 EXTENSION FOR 132KV/25KV TRACTION SUBSTATION
FOUNDATION & STUB DETAILS FOR TOWERS T2 AND T2 EXTENSIONFOR 132KV/25KV TRACTION SUBSTATION
DETAILS OF BEAM B2 AND COLOMN C1 FOR 132KV/25KV TRACTION SUBSTATION
CIVIL FOLDER 12 REF 2
FOUNDATIONS AND DETAILS OF STRUCTURES FOR 66KV DOUBLE POLE ISOLATORS
DETAILS OF STRUCTURE AND FOUNDATION FOR 25KV DP ISOLATOR AT TRACTION SUBSTATIONS
DETAILS OF STRUCTURE STRENGTHENING FOR 132KV DOUBLE AND TRIPLE POLE MOCB
STRENGTHENING OF MOUNTING STRUCTURES FOR 132KV CT, PT AND LA
CIVIL FOLDER 13 REF 2
DRILLING SCHEDULE FOR S1 MAST
DRILLING SCHEDULE FOR S2 MAST
DETAILS OF SMALL PARTS STEEL FOR SWITCHING STATIONS
DETAILS OF SMALL PARTS STEEL FOR SWITCHING STATIONS’
DETAILS OF BRACING FOR SWITCHING AND BOOSTER TRANSFORMER MASTS
DRILLING SCHEDULE FOR 8″X6″X35 Lbs R.S.J.MASTS 8.0m LONG FOR BOOSTER TRANSFORMER STATIONS TYPE S-4
DETAILS OF SMALL PARTS STEEL OF OUTRIGGER FOR SWITCHING STATIONS AND BOOSTER TRANSFORMER STATIONS
DETAILS OF PRECAST CABLE TRENCH FOR SWITCHING STATIONS
DETAILS OF SMALL PARTS STEEL FOR BOOSTER TRANSFORMER STATION
DRILLING SCHEDULE FOR S-5 MAST
S-100 FABRICATED MASTS FOR MOUNTING LT SUPPLY TRANSFORMER AND DROPOUT FUSE SWITCH AT SWITCHING STATIONS
REMOTE CONTROL CUBICLE AT SWITCHING STATION (FOUNDATION, RCC, SLAB BUILDING PLAN & STEEL DOOR
DRILLING SCHEDULE FOR S3 MAST
DRILLING SCHEDULE FOR S6 MAST (LENGTH 12.4m)
DRILLING SCHEDULE FOR S7 MAST (LENGTH 12.4m)
DRILLING SCHEDULE FOR S8 MAST (LENGTH 12.4m)
DRILLING SCHEDULE FOR S9 MAST (LENGTH 9.4m)
CIVIL FOLDER 14 REF-1
EMPLOYMENT SCHEDULE FOR SWITCHING AND BOOSTER STATION MAIN MASTS
EMPLOYMENT SCHEDULE OF SWITCHING STATION MAIN MAST ETI/C/0185 REV C DATED 09.11.2017
DETAILS OF FENCING UPRIGHTS AND ANTICLIMBING DEVICE FOR SWITCHING STATIONS
GENERAL ARRANGEMENT AND DETAILS OF FENCING PANEL AND GATE FOR SWITCHING STATION
MOUNTING ARRANGEMENT FOR FLASHER ON OHE MASTS
GENERAL ARRANGEMENT AND SPS DETAILS FOR MOUNTING DP ISOLATOR ON K-250/B-250 MASTS
STRUCTURE ASSEMBLY FOR BOOSTER TRANSFORMER
DETAILS OF BEAM FOR BT SUPPORT
DETAILS OF TOP BEAM FOR SUPPORT INSULATOR AND LIGHTENING ARRESTORS
CIVIL FOLDER 15 REF-2
DETAILS OF BEAM B-100-B FOR BT SUPPORT
SPS DETAILS FOR MOUNTING OF AUXILIARY TRANSFORMER ON OHE MASTS
TYPICAL STRUCTURE ASSEMBLY FOR SIMPLIFIED SWITCHING STATIONS (3 INTERRUPTERS)
TYPICAL SIMPLIFIED SWITCHING STATIONS (3 INTERRUPTERS SPS DETAILS)
TYPICAL SIMPLIFIED SWITCHING STATION (3 INTERRUPTERS)
TYPICAL STRUCTURAL ASSEMBLY FOR SIMPLIFIED SECTIONING AND PARALLELING STATION
TYPICAL STRUCTURAL ASSEMBLY FOR SIMPLIFIED SECTIONING AND PARALLELING STATION
TYPICAL STRUCTURAL ASSEMBLY FOR SIMPLIFIED SWITCHING STATION SINGLE INTERRUPTER
TYPICAL SIMPLIFIED SWITCHING STATION SINGLE INTERRUPTER SPS DETAILS
CIVIL FOLDER 16 REF 1
SHORT SUPERMAST ASEEMBLY
SHORT SUPERMAST CHANNEL
BATTEN PLATE TYPE-1
0.8m SUPERMAST CROSS ARM
SUSPENSION SUPPORT ANGLE
SUSPENSION SUPPORT ANGLES
SUSPENSION SUPPORT ANGLE (MODIFIED ARRANGEMENT)
1.5m SUPERMAST CROSS ARM
BATTEN PLATE TYPE-II
LONG SUPERMAST ASSEMBLY
LONG SUPERMAST CHANNEL
2.8m SUPERMAST CROSS ARM
BRACKET ATTACHMENT ASSEMBLY ON PORTAL UPRIGHT (N, O, R, P, G AND BFB)
PORTAL BRACKET ATTACHMENT
FRONT CLAMPING ANGLE
SUPERMAST ASSEMBLY ON PORTALS
PORTAL SUPERMAST
BASE CLAMPING ANGLE FOR PORTALS
SUSPENSION SUPPORT ANGLE ON PORTALS FOR RETURN CONDUCTORS
CROSS ARM (TTC AND PORTALS)
SPS FOR R.C. SUSPENSION (TTC AND PORTAL)
SPS FOR R.C. SUSPENSION (TTC AND PORTALS)
CIVIL FOLDER 17 REF -1
DETAILS OF SPECIAL GUIDE TUBE BRACKET ANGLE FOR CEMENT CONCRETE COUNTER WEIGHT
DETAILS OF GUIDE TUBE BRACKET ANGLE FOR CEMENT CONCRETE COUNTER WEIGHT
DETAILS OF GUIDE TUBE SUPPORT ANGLE FOR CEMENT CONCRETE COUNTER WEIGHT
DETAILS FOR SPECIAL GUIDE TUBE BRACKET ANGLE FOR CEMENT CONCRETE COUNTER WEIGHT
DETAILS OF GUIDE TUBE SUPPORT ANGLE FOR CEMENT CONCRETE COUNTER WEIGHT
PORTAL SUPERMAST FOR 2X25KV AT SYSTEM OHE
1.3m FEEDER SUPER MAST CROSS ARM FOR 2X25KV AT SYSTEM OHE
FEEDER SUPERMAST CHANNEL FOR 2X25KV AT SYSTEM OHE
2.3m FEEDER SUPERMAST CROSS ARM FOR FEEDER (2X25KV AT SYSTEM OHE)
BATTEN PLATE TYPE-III FOR 2X 25KV AT SYSTEM OHE
CLEAT ANGLE FOR 2X25KV AT SYSTEM OHE
SUSPENSION SUPPORT ANGLE FOR 2X25KV AT SYSTEM OHE
FEEDER SUPPORT CLAMP FOR 2X25KV AT SYSTEM OHE
SPS DETAILS FOR DOUBLE POLE ISOLATOR N AND O TYPE PORTALS 2X 25KV
SPS DETAILS FOR DOUBLE POLE ISOLATOR ON MAST (FOR 2X25KV)
GENERAL ARRANGEMENT FOR SHORT SUPERMAST ASSEMBLY FOR TM SERIES MAST
SHORT SUPERMAST ASSEMBLY FOR TM SERIES MAST SPS DETAILS
CIVIL FOLDER 18 REF-2
EMPLOYMENT SCHEDULE FOR CANTILEVER MAST REGULATED OHE WITHOUT RC EARTHWIRE WIND ZONE 112.5Kg/SQm Al CAT
EMPLOYMENT SCHEDULE FOR CANTILEVER MAST REGULATED OHE WITHOUT RC WITH EARTHWIRE WIND ZONE 112.5Kg/SQm Al CAT
EMPLOYMENT SCHEDULE FOR CANTILEVER MAST REGULATED OHE WITH RC WITH EW Al CAT 112.5
EMPLOYMENT SCHEDULE FOR CANTILEVER MAST REGULATED OHE WITH RC AND EW Al CAT 112.5
EMPLOYMENT SCHEDULE FOR REGULATED OHE WITHOUT RC AND WITHOUT EW 112.5
EMPLOYMENT SCHEDULE FOR REGULATED OHE WITHOUT RC AND WITH EW 112.5
EMPLOYMENT SCHEDULE FOR REGULATED OHE WITH RC AND WITHOUT EW 112.5
EMPLOYMENT SCHEDULE FOR REGULATED OHE WITH RC AND WITH EW 112.5
EMPLOYMENT SCHEDULE FOR UNREGULATED OHE WITHOUT RC AND WITHOUT EW 112.5
EMPLOYMENT SCHEDULE FOR UNREGULATED OHE WITH RC AND WITH EW 112.5
CIVIL FOLDER 19 REF 1
EMPLOYMENT SCHEDULE FOR CANTILEVER MAST REGULATED OHE WITHOUT RC WITHOUT EARTHWIRE WIND ZONE 150 Kg/SQm
EMPLOYMENT SCHEDULE FOR CANTILEVER MAST REGULATED OHE WITHOUT RC WITH EARTHWIRE WIND ZONE 150Kg/SQm
EMPLOYMENT SCHEDULE FOR CANTILEVER MAST REGULATED OHE WITH RC WITHOUT EW WIND ZONE 150Kg/Sqm
EMPLOYMENT SCHEDULE FOR CANTILEVER MAST REGULATED OHE WITH RC AND WITH EW WIND ZONE 150Kg/Sqm
EMPLOYMENT SCHEDULE FOR CANTILEVER MAST UNREGULATED OHE WITHOUT RC AND WITHOUT EW WIND ZONE 150Kg/Sqm
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS WIND ZONE 150Kg/Sqm
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITHOUT RC AND WITHOUT EW WIND ZONE 150 Kg/Sqm
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITHOUT RC AND WITH EW WIND ZONE 150Kg/Sqm
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITH RC AND WITHOUT EW WIND ZONE 150Kg/Sqm
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITH RC AND WITH EW WIND ZONE 150Kg/Sqm
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITH RC AND WITHOUT EW WIND ZONE 150Kg/Sqm
CIVIL FOLDER 20 REF 1
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITHOUT R.C. AND WITHOUT EARTH WIRE WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITHOUT R.C. AND WITH EARTH WIRE WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITH R.C. AND WITHOUT EARTH WIRE WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITH R.C. AND WITH EARTH WIRE WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS UNREGULATED OHE WITHOUT R.C. AND WITHOUT EARTH WIRE WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITHOUT R.C. AND WITHOUT EARTH WIRE WIND ZONE 75 Kgf/Sq.m Al Cat
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITHOUT R.C. AND WITH EARTH WIRE WIND ZONE 75 Kgf/Sq.m Al Cat
EMPLOYMENT SCHEDULE FOR CANTILEVER MASTS REGULATED OHE WITH R.C. AND WITHOUT EARTH WIRE WIND ZONE 75 Kgf/Sq.m Al Cat
EMPLOYMENT SCHEDULE FOR TRAMWAY TYPE OHE WITHOUT R.C. AND WITHOUT EARTH WIRE WIND ZONE 75 Kgf/Sq.m
CIVIL FOLDER 21 REF 1
EMPLOYMENT SCHEDULE FOR TRAMWAY TYPE REGULATED OHE WITHOUT R.C. AND WITHOUT EARTH WIRE WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR TRAMWAY TYPE REGULATED OHE WITHOUT R.C. AND WITH EARTH WIRE WIND ZONE 150 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR BFB 9.5m LONG WIND ZONE 150 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR BFB 9.5m LONG WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m LONG OVERLAP CENTRAL LOCATION WITH 3.0m IMP WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m LONG OVERLAP CENTRAL LOCATION WITH 3.0m IMP WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR OHE MASTS 9.5m LONG OVERLAP WITH 3.0m IMP WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR OHE MASTS 9.5m LONG OVERLAP WITH 3.0m IMP WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR OHE MASTS 200X200X49.9Kg WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR OHE MASTS 200X200X49.9 Kg WIND ZONE 112.5 Kgf/Sq.m
CIVIL FOLDER 22 REF 2
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST AT OVERLAP ANCHOR LOCATION WITH 3.00m IMP WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST AT OVERLAP ANCHOR LOCATION WITH 3.00m IMP WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST COMPOSITE OHE (EW+RC) WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST COMPOSITE OHE (OHE ONLY) WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST COMPOSITE OHE (OHE + EW ONLY) WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST COMPOSITE OHE (OHE + RC ONLY) WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST OVERLAP ANCHOR WITH 3.00m IMP COMPOSITE OHE (OHE ONLY) WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST OVERLAP ANCHOR WITH 3.00m IMP COMPOSITE OHE WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST OVERLAP ANCHOR WITH 3.00m IMP COMPOSITE OHE WIND ZONE 112.5 Kgf/Sq.m
CIVIL FOLDER 23 REF-2
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) COMPOSITE OHE (EW+RC) WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) COMPOSITE OHE (OHE + EW) WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) COMPOSITE OHE (OHE+RC) WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) OVERLAP ANCHOR LOCATION WITH EXTR A SETTING DISTANCE WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) COMPOSITE OHE OVERLAP CENTRAL LOCATION WITH EXTR A SETTING DISTANCE WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) COMPOSITE OHE OVERLAP INTER LOCATION WITH EXTR A SETTING DISTANCE WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE MAST WIND ZONE 150 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR COMPOSITE OHE (OHE+EW+RC) WIND ZONE 150 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE (OHE ONLY) WIND ZONE 150 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR COMPOSITE OHE (OHE+EW) WIND ZONE 150 Kgf/Sqm
CIVIL FOLDER 21 REF 1
EMPLOYMENT SCHEDULE FOR TRAMWAY TYPE REGULATED OHE WITHOUT R.C. AND WITHOUT EARTH WIRE WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR TRAMWAY TYPE REGULATED OHE WITHOUT R.C. AND WITH EARTH WIRE WIND ZONE 150 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR BFB 9.5m LONG WIND ZONE 150 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR BFB 9.5m LONG WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m LONG OVERLAP CENTRAL LOCATION WITH 3.0m IMP WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m LONG OVERLAP CENTRAL LOCATION WITH 3.0m IMP WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR OHE MASTS 9.5m LONG OVERLAP WITH 3.0m IMP WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR OHE MASTS 9.5m LONG OVERLAP WITH 3.0m IMP WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR OHE MASTS 200X200X49.9Kg WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR OHE MASTS 200X200X49.9 Kg WIND ZONE 112.5 Kgf/Sq.m
CIVIL FOLDER 22 REF 2
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST AT OVERLAP ANCHOR LOCATION WITH 3.00m IMP WIND ZONE 75 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST AT OVERLAP ANCHOR LOCATION WITH 3.00m IMP WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST COMPOSITE OHE (EW+RC) WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST COMPOSITE OHE (OHE ONLY) WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST COMPOSITE OHE (OHE + EW ONLY) WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST COMPOSITE OHE (OHE + RC ONLY) WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST OVERLAP ANCHOR WITH 3.00m IMP COMPOSITE OHE (OHE ONLY) WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST OVERLAP ANCHOR WITH 3.00m IMP COMPOSITE OHE WIND ZONE 112.5 Kgf/Sq.m
EMPLOYMENT SCHEDULE FOR 9.5m OHE MAST OVERLAP ANCHOR WITH 3.00m IMP COMPOSITE OHE WIND ZONE 112.5 Kgf/Sq.m
CIVIL FOLDER 23 REF-2
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) COMPOSITE OHE (EW+RC) WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) COMPOSITE OHE (OHE + EW) WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) COMPOSITE OHE (OHE+RC) WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) OVERLAP ANCHOR LOCATION WITH EXTR A SETTING DISTANCE WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) COMPOSITE OHE OVERLAP CENTRAL LOCATION WITH EXTR A SETTING DISTANCE WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR REGULATED OHE MAST (9.5m) COMPOSITE OHE OVERLAP INTER LOCATION WITH EXTR A SETTING DISTANCE WIND ZONE 75 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE MAST WIND ZONE 150 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR COMPOSITE OHE (OHE+EW+RC) WIND ZONE 150 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE (OHE ONLY) WIND ZONE 150 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR COMPOSITE OHE (OHE+EW) WIND ZONE 150 Kgf/Sqm
CIVIL FOLDER 24 REF 1
EMPLOYMENT SCHEDULE FOR OHE MAST (9.5m) OVERLAP ANCHOR LOCATION WITH EXTRA IMPLANTATION WIND ZONE 150 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE MAST (9.5m) OVERLAP CENTRAL LOCATION WITH EXTRA IMPLANTATION WIND ZONE 150 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE MAST (9.5m) OVERLAP INTER ANCHOR LOCATION WITH EXTRA IMPLANTATION WIND ZONE 150 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE MAST (9.5m) WITH 1200KG TENSION 160KMPH WIND ZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE MAST (9.5m) WITH 1200KG TENSION OHE + RC 160KMPH WIND ZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE MAST (9.5m) WITH 1200KG TENSION OHE+EW+RC 160KMPH WIND ZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE MAST (9.5m) WITH 1200KG TENSION OHE ONLY 160KMPH WIND ZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE MAST (9.5m) WITH 1200KG +1200 KG TENSION OVERLAP ANCHOR LOCATION 160KMPH WIND ZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE FOR OHE MAST (9.5m) WITH 1200KG TENSION OVERLAP INTER LOCATION 160KMPH WIND ZONE 112.5 Kgf/Sqm
CIVIL FOLDER 26 REF- 1
EMPLOYMENT SCHEDULE OF OHE MAST 9.5m AAA OHE WITH 1000 Kgf TENSION (OHE + RC) WINDZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE OF OHE MAST 9.5m AAA OHE WITH 1000 Kgf TENSION (OHE + EW+ RC) WINDZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE OF OHE MAST 9.5m AAA OHE WITH 1000 Kgf TENSION (OHE + EW) WINDZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE OF OHE MAST 9.5m AAA OHE WITH 1000 Kgf TENSION (OHE ONLY) WINDZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE OF OHE MAST 9.5m AAA OHE WITH 1000 Kgf TENSION OVERLAP CENTER LOCATION WITH HIGHER IMP WINDZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE OF OHE MAST 9.5m AAA OHE WITH 1000 Kgf TENSION OVERLAP INTER LOCATION WITH HIGHER IMP WINDZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE OF OHE MAST 9.5m AAA OHE WITH 1000 Kgf TENSION OVERLAP ANCHOR LOCATION WITH HIGHER IMP WINDZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE OF OHE MAST 9.5m 2X25KV OHE WITH 1000 + 1000 Kgf TENSION OHE WITH AT FEEDER WITHOUT EW WINDZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE OF OHE MAST 9.5m 2X25KV OHE WITH 1000 + 1000 Kgf TENSION OHE WITH AT FEEDER WITH EW WINDZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE OF OHE MAST 9.5m 2X25KV OHE WITH 1000 + 1000 Kgf TENSION OHE WITH AT FEEDER WITH EW EXTRA SETTING WINDZONE 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE OF OHE MAST 9.5m 2X25KV OHE WITH 1000 + 1000 Kgf TENSION OHE WITH AT FEEDER WITHOUT EW WINDZONE 112.5 Kgf/Sqm
CIVIL FOLDER 27 REF -2
EMPLOYMENT SCHEDULE FOR 2X25KV COMPOSITE OHE WITH 1000 + 1000 Kgf TENSION OHE + AT FEEDER WITHOUT EW EXTRA SETTING WIND ZONE 112.5Kgf/Sqm
EMPLOYMENT SCHEDULE FOR 2X25KV COMPOSITE OHE WITH 1000 + 1000 Kgf TENSION OHE + AT FEEDER WITH EW EXTRA SETTING WIND ZONE 112.5Kgf/Sqm
EMPLOYMENT SCHEDULE FOR 2X25KV COMPOSITE OHE WITH 1000 + 1000 Kgf TENSION OHE + AT FEEDER WITH EW EXTRA SETTING WIND ZONE 112.5Kgf/Sqm
EMPLOYMENT SCHEDULE FOR 2X25KV COMPOSITE OHE WITH 1000 + 1000 Kgf TENSION OHE + AT FEEDER WITHOUT EW EXTRA SETTING WIND ZONE 112.5Kgf/Sqm
EMPLOYMENT SCHEDULE FOR 2X25KV COMPOSITE OHE WITH 1200 + 1200 Kgf TENSION OHE WITH EW EXTRA SETTING WITH 3:1 REGULATING EQUIPMENT WIND ZONE 112.5Kgf/Sqm
EMPLOYMENT SCHEDULE FOR 2X25KV COMPOSITE OHE WITH 1200 + 1200 Kgf TENSION OHE + RC WITH 3:1 REGULATING EQUIPMENT EXTRA SETTING WIND ZONE 112.5Kgf/Sqm
EMPLOYMENT SCHEDULE FOR 2X25KV COMPOSITE OHE WITH 1200 + 1200 Kgf TENSION OHE + RC + EW CONTACT 150 Sqmm WITH 3:1 REGULATING EQUIPMENT EXTRA SETTING WIND ZONE 112.5Kgf/Sqm
EMPLOYMENT SCHEDULE FOR 2X25KV COMPOSITE OHE WITH 1200 + 1200 Kgf TENSION OHE ONLY CONTACT 150 Sqmm WITH 3:1 REGULATING EQUIPMENT EXTRA SETTING WIND ZONE 112.5Kgf/Sqm
EMPLOYMENT SCHEDULE FOR 2X25KV COMPOSITE OHE WITH 1200 + 1200 Kgf TENSION OHE CONTACT 150 OVERLAP CENTER LOCATION EXTRA SETTING WIND ZONE 112.5Kgf/Sqm
EMPLOYMENT SCHEDULE FOR 2X25KV COMPOSITE OHE WITH 1200 + 1200 Kgf TENSION OHE CONTACT 150 OVERLAP ANCHOR LOCATION EXTRA SETTING 3:1 REGULATING EQUIPMENT WIND ZONE 112.5Kgf/Sqm
EMPLOYMENT SCHEDULE FOR 2X25KV COMPOSITE OHE WITH 1200 + 1200 Kgf TENSION OHE CONTACT 150 OVERLAP INTER LOCATION EXTRA SETTING WIND ZONE 112.5Kgf/Sqm
CIVIL FOLDER 28 REF-1
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 112.5Kgf/Sqm CONT 150Sqmm OHE+EW 800+1200Kgf
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 112.5Kgf/Sqm CONT 150Sqmm OHE+RC 800+1200Kgf
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 112.5Kgf/Sqm CONT 150Sqmm OHE 800+1200Kgf
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 75Kgf/Sqm CONT 150Sqmm OHE+RC 800+1200Kgf
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 150Kgf/Sqm CONT 150Sqmm OHE+EW 800+1200Kgf
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 150Kgf/Sqm CONT 150Sqmm OHE+EW+ R.C. 800+1200Kgf
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 150Kgf/Sqm CONT 150Sqmm OHE+R.C. 800+1200Kgf
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 75Kgf/Sqm CONT 150Sqmm OHE+EW 800+1200Kgf
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 75 Kgf/Sqm CONT 150Sqmm OHE+EW+R.C. 800+1200Kgf
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 75Kgf/Sqm CONT 150Sqmm OHE ONLY 800+1200Kgf
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 112.5Kgf/Sqm CONT 150Sqmm OHE+EW+RC 800+1200Kgf
EMPLOYMENT SCHEDULE FOR OHE MAST 9.5m WIND 150Kgf/Sqm CONT 150Sqmm OHE ONLY 800+1200Kgf
CIVIL FOLDER 29 REF-1
VOLUME AND EQUIVALENT CHART OF FOUNDATIONS FOR DRY BLACK COTTON SOIL (NBC TYPE) FOR 16500 AND 11000 Kgf/Sqm 3.0m DEPTH
MUFF FOR OHE STRUCTURES
STRUCTURE MUFF FOR SAND CORED FOUNDATIONS
DWARF MAST FOUNDATION FOR LOOSE SOIL (SAFE BEARING CAPACITY 5500Kgf/Sqm)
TYPICAL SIDE BEARING FOUNDATIONS ON BANKS
DETAILS FOR FOUNDATIONS FOR FENCING UPRIGHTS
PILE FOUNDATIONS FOR OHE STRUCTURES IN LOOSE BANKS
VOLUME CHART AND EQUIVALENT CHART OF FOUNDATIONS
VOLUME CHART AND EQUIVALENT CHART OF FOUNDATIONS (4000Kg DIRECT LOAD)
CIVIL FOLDER 30 REF 2
CHART FOR PORTAL FOUNDATIONS IN DRY BLACK COTTON SOIL SAFE BEARING CAPACITY 16500 Kgf/Sqm
DETAILS OF FOUNDATIONS FOR PORTALS IN HARD ROCK (SAFE BEARING PRESSURE 90000 Kgf/Sqm)
DETAILS OF FOUNDATIONS FOR 132KV/25KV TRACTION SUB STATION STRUCTURES
CIVIL FOLDER 31 REF 01
DETAILS OF BASE PLATE OF MAST ON DRAINS IN STATION YARDS
BOLTED PLATE CONNECTIONS FOR PORTALS LOCATED IN DRAINS
PROTECTIVE SCREEN AT FOOT OVER BRIDGE AND ROAD OVER BRIDGE
DANGER PLATE IN LEVEL CROSSING GAUGE FOR ELECTRIFIED SECTIONS
132KV EMERGENCY TOWER (WITH RSJ) OUT LINE DIAGRAM
CIVIL FOLDER 32 REF 2
EMPLOYMENT SCHEDULE FOR PRE STRESSED SPUN CONCRETE MAST (PC 42) 9.5m LONG CONVENTIONAL OHE NORMAL LOCATION WIND PRESSURE 150, 112.5 & 75 Kgf/Sqm
EARTHING AND BONDING OF PSC MAST
TYPICAL EARTHING ARRANGEMENT IN SPUN PSC MAST WITH 18mm DIA ROD
BRACKET FITTING FOR PSC MAST CAPACITY 4200 Kgm GENERAL ARRANGEMENT AND SPS DETAILS
SPS DETAILS FOR EARTH WIRE CLAMP ON PSC MAST
RC ARRANGEMENT IN PSC MAST
FOLDER 24 REF 2 (PSI)
GENERAL SCHEME OF SUPPLY FOR 25KV, 50Hz SINGLE PHASE TRACTION SYSTEM
TYPICAL LAYOUT OF REMOTE CONTROL CENTER
TYPICAL LAYOUT OF REMOTE CONTROL CENTER FOR COMPUTER BASED SCADA SYSTEM
CONTROL AND RELAY PANEL FOR AC TRACTION SUBSTATION
TYPICAL SCHEMATIC PROTECTION ARRANGEMENT FOR SHUNT CAPACITOR BANK OF TRACTION SUB STATION
OHE FOLDER 29 REF 1
RAISED REGISTER ARM CLAMP
RAISED REGISTER ARM CLAMP 150FB
CROSSING CLAMP ASSEMBLY
SHORT DROPPER ASSEMBLY
SPECIAL DROPPER ASSEMBLY
PARALLEL CLAMP (105/240)
BIMETTALIC PARALLEL CLAMP (10/20)
LARGE SUSPENSION CLAMP 20mm WITH ARMOUR ROD
STEEL WIRE JOINT SOCKET
STEEL WIRE JOINT CONE
PARALLEL CLAMP (20/20)
BI METTALIC PARALLEL CLAMP(15/20)
LARGE SUSPENSION CLAMP 20mm
CROSSING CLAMP PIECE
OHE FOLDER NO 06
REGULATING EQUIPMENT WINCH TYPE 5:1 RATIO
REGULATING EQUIPMENT DRUM OF WINCH TYPE
DEAD SECTION CAUTION BOARD (CAUTION, UNWIRED TURNOUTS)
GILL SANS MEDIUM LETTERS AND FIGURES SIZE 3′
WARNING FOR NEUTRAL SECTION
SIGNALS AT NEUTRAL SECTION FOR ELECTRIC ENGINE STOP SWITCH OFF POWER
GILL SANS MEDIUM LETTERS AND FIGURE SIZES 3′
OHE FOLDER NO 08
SECTION INSULATOR ASSEMBLY
SIGNALS AT NEUTRAL SECTION FOR ELECTRIC ENGINES TO SWITCH ON POWER
ARRANGEMENT FOR FIXING OF DANGER BOARD FOR LIMIT OF CARRIAGE WATERING UNDER OVERHEAD EQUIPMENT
WARNING FOR NEUTRAL SECTION
GENERAL CAUTION NOTICE FOR STAFF
GILL SANS LETTERS AND FIGURES
REGULATING EQUIPMENT THREE PULLEY TYPE 3:1 RATIO MODIFIED
PART DETAILS OF REGULATING EQUIPMENT 3:1 RATIO MODIFIED
SPECIAL BRACKET FOR COLLAPSIBLE OHE
GENERAL ARRANGEMENT OF FIXING THE SPECIAL BRACKET ASSEMBLY AND SUSPENSION OF CONTACT WIRE
GENERAL ARRANGEMENT OF SUSPENSION OF CONTACT WIRE(S) FROM EXISTING BRACKET ASSEMBLY OF TRAMWAY OHE
GENERAL ARRANGEMENT FOR COLLAPSING THE OHE
GENERAL ARRANGEMENT OF FIXING OF CONDUIT PIPE ON SPECIAL BRACKET ASSEMBLY AND CONNECTION OF WIRE ROPE
SPECIAL STAY ARM INSULATOR FOR COLLAPSIBLE OHE
SPECIAL JUMPER CLAMP
SIGNALS AT NEUTRAL SECTION
MOTORISED ARRANGEMENT FOR SWIVELING THE OHE
GENERAL ARRANGEMENT OF ISOLATOR CONNECTION TO SWIVELING OHE
LAYOUT PLAN FOR SWIVELING OHE
OHE FOLDER NO 21
REGULATING EQUIPMENT THREE PULLEY TYPE 3:1 RATIO MODIFIED
PART DETAILS OF 3:1 RATIO REGULATING EQUIPMENT MODIFIED
ADJUSTMENT CHART OF REGULATING EQUIPMENT 3:1 RATIO THREE PULLEY TYPE MODIFIED
TRAPEZOIDAL COUNTER WEIGHT ASSEMBLY 3:1 RATIO
CLEVIS AND EYE FORGED
ADJUSTMENT CHART OF REGULATING EQUIPMENT THREE PULLEY TYPE 3:1 RATIO OLD FOR COMPOSITE OHE
ADJUSTMENT CHART OF REGULATING EQUIPMENT THREE PULLEY TYPE 3:1 RATIO MODIFIED FOR COMPOSITE OHE
BOLT M-18 WITH CASTLE NUT
FIXING ARRANGEMENT OF MAST ANCHOR FITTING FOR ANTIFALLING DEVICE IN THREE PULLEY MODIFIED ATD
OHE FOLDER NO 29
STRAIN CLAMP LINK ASSEMBLY
U CLAMP (50/50)
U CLAMP (50)
PULL OFF CLAMP ASSEMBLY
DOUBLE CONTACT WIRE SPLICE
SUSPENSION CLEVIS ASSEMBLY (18mm)
THIMBLE (10mm)
STEEL WIRE ENDING CLAMP (90)
DOUBLE CONTACT WIRE SWIVEL CLIP PART
STRAIN CLAMP LINK
STEEL WIRE JOINT SOCKET
STEEL WIRE JOINT CONE
OHE FOLDER NO 32
TUBE CAP 40mm
STANDARD CATENARY SUSPENSION BRACKET
STANDARD CATENARY SUSPENSION BRACKET DETAILS
STANDARD CATENARY SUSPENSION BRACKET BOTTOM
STANDARD CATENARY SUSPENSION BRACKET TOP
STANDARD CATENARY DIRECT CLAMP
STANDARD CATENARY DIRECT CLAMP TOP
STANDARD CATENARY DIRECT CLAMP BOTTOM
DIRECT CATENARY CLAMP GRIP
DIRECT CATENARY CLAMP STUD
BRIDLE WIRE SLEEVE
LARGE CATENARY SUSPENSION BRACKET
LARGE CATENARY SUSPENSION BRACKET DETAILS
OHE FOLDER NO 21
REGULATING EQUIPMENT THREE PULLEY TYPE 3:1 RATIO MODIFIED
PART DETAILS OF 3:1 RATIO REGULATING EQUIPMENT MODIFIED
ADJUSTMENT CHART OF REGULATING EQUIPMENT 3:1 RATIO THREE PULLEY TYPE MODIFIED
TRAPEZOIDAL COUNTER WEIGHT ASSEMBLY 3:1 RATIO
CLEVIS AND EYE FORGED
ADJUSTMENT CHART OF REGULATING EQUIPMENT THREE PULLEY TYPE 3:1 RATIO OLD FOR COMPOSITE OHE
ADJUSTMENT CHART OF REGULATING EQUIPMENT THREE PULLEY TYPE 3:1 RATIO MODIFIED FOR COMPOSITE OHE
BOLT M-18 WITH CASTLE NUT
FIXING ARRANGEMENT OF MAST ANCHOR FITTING FOR ANTIFALLING DEVICE IN THREE PULLEY MODIFIED ATD
OHE FOLDER NO 29
STRAIN CLAMP LINK ASSEMBLY
U CLAMP (50/50)
U CLAMP (50)
PULL OFF CLAMP ASSEMBLY
DOUBLE CONTACT WIRE SPLICE
SUSPENSION CLEVIS ASSEMBLY (18mm)
THIMBLE (10mm)
STEEL WIRE ENDING CLAMP (90)
DOUBLE CONTACT WIRE SWIVEL CLIP PART
STRAIN CLAMP LINK
STEEL WIRE JOINT SOCKET
STEEL WIRE JOINT CONE
OHE FOLDER NO 32
TUBE CAP 40mm
STANDARD CATENARY SUSPENSION BRACKET
STANDARD CATENARY SUSPENSION BRACKET DETAILS
STANDARD CATENARY SUSPENSION BRACKET BOTTOM
STANDARD CATENARY SUSPENSION BRACKET TOP
STANDARD CATENARY DIRECT CLAMP
STANDARD CATENARY DIRECT CLAMP TOP
STANDARD CATENARY DIRECT CLAMP BOTTOM
DIRECT CATENARY CLAMP GRIP
DIRECT CATENARY CLAMP STUD
BRIDLE WIRE SLEEVE
LARGE CATENARY SUSPENSION BRACKET
LARGE CATENARY SUSPENSION BRACKET DETAILS
OHE FOLDER NO 60
SMALL PARTS STEEL WORKS FOR MOUNTING OF 3KV, 11KV, 25KV POST INSULATOR
INSULATOR MOUNTING CHANNEL FOR CONNECTION OF R.C. TO TRACK
CLAMPING PLATE AND CHANNEL FOR CONNECTION OF R.C. TO RAIL
SUPPORTING PLATE AND WOODEN BLOCK FOR CONNECTION OF R.C. TO TRACK
GALVANISED STEEL TUBE
GUIDE TUBE BRACKET ANGLE FOR ATTACHMENT ON FABRICATED MASTS K-150, 175, 200, 225 TTC AND P TYPE PORTAL TRAPEZOIDAL COUNTER WEIGHT
GUIDE TUBE BRACKET ANGLE FOR ATTACHMENT ON G TYPE PORTAL FOR TRAPEZOIDAL COUNTER WEIGHT
GUIDE TUBE BRACKET ANGLE FOR ATTACHMENT ON 6″X6″ BFB MAST AND BFB TYPE PORTAL FOR TRAPEZOIDAL COUNTER WEIGHT
GUIDE TUBE BRACKET ANGLE FOR ATTACHMENT ON FABRICATED MASTS K-150,175,200,225 TTC AND ON P AND G TYPE PORTAL FOR TRAPEZOIDAL COUNTER WEIGHT
OHE FOLDER-1 REF-2
STANDARD DRILLING SCHEDULE OF OHE MASTS 9.5m LONG RSJ AND BFB TYPE
EXTRA ALLOWANCES FOR SETTING OF STRUCTURES ON CURVES
EXTRA ALLOWANCES FOR SETTING OF STRUCTURES ON CURVES (METER GAUGE)
STANDARD SETTING OF STRUCTURES IN THE VICINITY OF SIGNALS BROAD GAUGE
TYPICAL DESIGN OF SIDE BEARING FOUNDATIONS
EMPLOYMENT SCHEDULE OF BRACKET TUBES REGULATED CONVENTIONAL OHE WP 150Kgf/Sqm
EMPLOYMENT SCHEDULE OF BRACKET TUBES REGULATED CONVENTIONAL OHE WINDZONE 112.5Kgf/Sqm
EMPLOYMENT SCHEDULE OF BRACKET TUBES REGULATED CONVENTIONAL OHE WP 75Kgf/Sqm
TYPICAL DESIGN OF CANTILEVER MAST
OHE FOLDER 2 REF 1
EMPLOYMENT SCHEDULE OF BRACKET TUBES UNREGULATED OHE WP 75Kgf/Sqm
EMPLOYMENT SCHEDULE OF BRACKET TUBES UNREGULATED OHE WP 112.5 Kgf/Sqm
EMPLOYMENT SCHEDULE OF BRACKET TUBES UNREGULATED OHE WP 150 Kgf/Sqm
GENERAL DISTRIBUTION OF DROPPERS
DROPPER SCHEDULE FOR UNREGULATED OHE WITH EQUAL ENCUMBRANCE (1.40m)
DROPPER SCHEDULE FOR UNREGULATED OHE WITH UNEQUAL ENCUMBRANCE (1.40m-0.90m)
DROPPER SCHEDULE FOR UNREGULATED OHE WITH UNEQUAL ENCUMBRANCE (1.40m-0.720)
DROPPER SCHEDULE FOR INSULATED OVERLAP SPANS
DROPPER SCHEDULE FOR COMPENSATED OHE EQUAL ENCUMBRANCE (1.40m) FOR SPEED UPTO 160 KMPH
DROPPER SCHEDULE FOR REGULATED OHE IN WORN OUT CONDITION OF 107Sqmm CONTACT WIRE (9.75mm THICKNESS)
DROPPER SCHEDULE OF UNINSULATED OVERLAP SPANS
OHE FOLDER 3 REF 1
DROPPER SCHEDULE FOR COMPENSATED OHE WITH UNEQUAL ENCUMBRANCE (1.40m/0.90m) 160 KMPH
DROPPER SCHEDULE FOR COMPENSATED OHE WITH UNEQUAL ENCUMBRANCE (1.40m/0.75m) 160 KMPH
DROPPER SCHEDULE FOR COMPENSATED OHE WITH UNEQUAL ENCUMBRANCE (1.75m/1.40m) 160 KMPH
DROPPER SCHEDULE FOR CONVENTIONAL REGULATED OHE WITH ZERO PRE SAG (1.40m/1.40m) 160 KMPH
OUTLINE OF PANTOGRAPH (BROAD GAUGE)
ARRANGEMENT OF PANTOGRAPH MULTIPLE HEADED TRAINS
GENERAL CLEARANCE DIAGRAM FOR BG TRACK TANGENT AND FLAT CURVE
GENERAL CLEARANCE DIAGRAM FOR MG TRACK TANGENT AND FLAT CURVE
GENERAL CLEARANCE DIAGRAM FOR BG TRACK SHARP CURVE
GENERAL CLEARANCE DIAGRAM FOR MG TRACK SHARP CURVE
RESTRICTED CLERANCES DIAGRAM ON TANGENT TRACK BG
RESTRICTED CLERANCES DIAGRAM ON TANGENT AND FLAT CURVE TRACK MG
OHE FOLDER 04
ARRANGEMENT OF NEUTRAL SECTION CONVENTIONAL
CONNECTIONS AT DIAMOND CROSSING
GENERAL ARRANGEMENT OF CONNECTION TO OHE BY COPPER CROSS FEEDER (150Sqmm)
CONTACT WIRE PARALLEL CLAMP LARGE
PARALLEL CLAMP (150/105-150)
CATENARY DROPPER ASSEMBLY
BFB STEADY ARM SWIVEL
9 TONNE ADJUSTER
GUY ROD DOUBLE STRAP ASSEMBLY
GUY ROD DOUBLE STRAP
PART DETAILS OF REGULATING EQUIPMENT WINCH TYPE
AXLES
PART DETAILS OF REGULATING EQUIPMENT WINCH TYPE
DRUM ANCHOR FITTING
ARM ANCHOR FITTING
CLEVIS AND EYE
BUS TERMINAL CONE
STRUCTURE BONDS
TYPICAL STRUCTURE NUMBER PLATE 125mm SIZE
MOUNTING OF 25KV ISOLATORS ON OHE STRUCTURES (STEEL WORKS DETAILS)
GUIDE TUBE BRACKET ANGLE FOR ATTACHMENTS ON 6″X6″ BFB MAST AND BFB TYPE PORTAL FOR TRAPEZOIDAL COUNTER WEIGHT
GUIDE TUBE BRACKET ANGLE FOR ATTACHMENT ON FABRICATED MASTS K-150, 175,200,225 TTC AND P & G TYPE PORTAL
GUIDE TUBE BRACKET ANGLE FOR ATTACHMENT ON FABRICATED MASTS K-150, 175,200,225 TTC AND P & G TYPE PORTAL
GUY ROD 20mm DIA
PROFILE OF GROOVED CONTACT WIRE 107 Sqmm
DROPPER SCHEDULE FOR UN INSULATED OVERLAP SPAN
INSULATED TEE JUNCTION
EARTHING CLAMP ASSEMBLY
DROPPER SCHEDULE FOR REGULATED OHE IN WORN OUT CONDITION OF 107 Sqmm CONTACT WIRE 10mm THICKNESS
JUMPER CLAMP (SMALL) COMPRESSION TYPE
MEN WORKING BOARD FOR EQUIPMENT
CAUTION BOARD FOR GANG MAN
CAUTION BOARD FOR SPECIAL LOCATION
ADJUSTMENT CHART OF REGULATING EQUIPMENT THREE PULLEY TYPE 3:1 MODIFIED
TRAPEZOIDAL COUNTER WEIGHT ASSEMBLY
CLEVIS AND EYE FORGED
FIXING ARRANGEMENT OF MAST ANCHOR FITTING FOR ANTI FALLING DEVICE IN THREE PULLEY MODIFIED ATD
DROPPER SCHEDULE OF REGULATED OHE WITH EQUAL ENCUMBRANCE 1.40mm/1.40mm
DROPPER SCHEDULE OF REGULATED OHE WITH UNEQUAL ENCUMBRANCE 1.40mm/0.90mm
DROPPER SCHEDULE OF REGULATED OHE WITH UNEQUAL ENCUMBRANCE 1.40mm/0.75mm
18mm SINGLE CLEVIS ASSEMBLY MODIFIED
REGISTER ARM EYE PIECE 25mm FORGED
TUBULAR STAY SLEEVE FORGED
STEADY ARM HOOK BFB FORGED
MAST FITTING FOR HOOK INSULATOR FORGED
STANDARD REGISTER ARM HOOK FORGED
REGISTER ARM HOOK TOP FORGED
REGISTER ARM HOOK BOTTOM FORGED
LARGE REGISTER ARM HOOK FORGED
LARGE REGISTER ARM HOOK TOP FORGED
LARGE REGISTER ARM HOOK BOTTOM FORGED
MAST BRACKET SWIVEL (150 FORGED)
MAST BRACKET SWIVEL (200 FORGED)
25mm STEADY ARM CLAMP FORGED
25mm DROP BRACKET ASSEMBLY FORGED
SCHEDULE ANCHOR BLOCK FOR BG TRACKS
DOUBLE GUY ROD ARRANGEMENT WITH ANCHOR BLOCK FOR BG TRACKS
SCHEDULE OF ANCHOR BLOCK FOR BG TRACKS BLACK COTTON SOIL
GUY ROD 25mm DIA
MODIFIED BFB STEADY ARM ASSEMBLY WITH 25mm DROP BRACKET (ID 2360)
OHE FOLDER 4 REF 1
RESTRICTED CLEARANCES DIAGRAM ON CURVED TRACKS
CHART SHOWING THE BLOW OFF, PUSH UP AND OSCILLATIONS OF THE STANDARD AC OHE
ADJUSTMENT CHART OF REGULATING EQUIPMENT THREE PULLEY TYPE (3:1 RATIO)
SPAN AND STAGGER CHART CONVENTIONAL OHE WIND PRESSURE 75, 112.5, 150 Kgf/Sqm
SAG AND TENSION CHART FOR LOADED CATENARY
RESTRICTED CLEARANCE DIAGRAM ON SHARP CURVES MG TRACK
ADJUSTMENT CHART OF REGULATING EQUIPMENT WINCH TYPE AND PULLEY BLOCK TYPE
CANTILEVER ADJUSTMENT CHART MEAN TEMPERATURE 35 DEGREE CELSIUS
GENERAL FORMATION OF SINGLE TRACK IN EMBANKMENTS AND CUTTING (BROAD GAUGE)
GENERAL FORMATION OF SINGLE TRACK IN EMBANKMENTS AND CUTTINGS (MG)
RECENTLY APPROVED DESIGNS
CYLINDRICAL FOUNDATIONS FOR SIDE BEARING LOCATIONS SBC 15000-20000
CALCULATION SHEET FOR SIDE BEARING FOUNDATIONS
CYLINDRICAL FOUNDATION FOR SIDE GRAVITY LOCATION FOR HIGH RISE OHE SBC 15000-20000
ELECTRIFICATION OF SINGLE LINE WHERE DOUBLING IS SANCTIONED OR NOT
OHE FOLDER 4 REF 1
RESTRICTED CLEARANCES DIAGRAM ON CURVED TRACKS
CHART SHOWING THE BLOW OFF, PUSH UP AND OSCILLATIONS OF THE STANDARD AC OHE
ADJUSTMENT CHART OF REGULATING EQUIPMENT THREE PULLEY TYPE (3:1 RATIO)
SPAN AND STAGGER CHART CONVENTIONAL OHE WIND PRESSURE 75, 112.5, 150 Kgf/Sqm
SAG AND TENSION CHART FOR LOADED CATENARY
RESTRICTED CLEARANCE DIAGRAM ON SHARP CURVES MG TRACK
ADJUSTMENT CHART OF REGULATING EQUIPMENT WINCH TYPE AND PULLEY BLOCK TYPE
CANTILEVER ADJUSTMENT CHART MEAN TEMPERATURE 35 DEGREE CELSIUS
GENERAL FORMATION OF SINGLE TRACK IN EMBANKMENTS AND CUTTING (BROAD GAUGE)
GENERAL FORMATION OF SINGLE TRACK IN EMBANKMENTS AND CUTTINGS (MG)
OHE FOLDER 5 REF 1
DOUBLE GUY ROD ARRANGEMENT WITH ANCHOR BLOCK FOR BG TRACK
SCHEDULE OF ANCHOR BLOCKS FOR BG TRACK BLACK COTTON SOIL
SCHEDULE OF ANCHOR BLOCKS FOR BG TRACK
ANCHOR ARRANGEMENT WITH DWARF MAST
GENERAL FORMATION OF DOUBLE TRACK IN EMBANKMENTS AND CUTTING (BROAD GAUGE)
GENERAL FORMATION OF DOUBLE TRACK IN EMBANKMENTS AND CUTTING (METER GAUGE)
GENERAL FORMATION OF MULTIPLE TRACK(1676mm GAUGE)
GENERAL FORMATION OF MULTIPLE TRACK(METER GAUGE)
LEADING DIMENSIONS OF TURNOUTS (BG)
LEADING DIMENSIONS OF TURNOUTS (MG)
LEADING DIMENSIONS OF CROSSINGS (BG)
LEADING DIMENSIONS OF DIAMOND CROSSINGS (MG)
NORMAL PROFILE OF MAXIMUM MOVING DIMENSIONS (METER GAUGE)
STANDARD ANCHOR ATTACHMENT
OHE FOLDER 6 REF 1
CEMENT CONCRETE COUNTER WEIGHT ARRANGEMENT ON OHE STRUCTURES
CEMENT CONCRETE COUNTER WEIGHT ARRANGEMENT ON N, O, R TYPE PORTAL UPRIGHTS
STANDARD GUIDE TUBE ARRANGEMENTS ON MAST AND STRUCTURES
ARRANGEMENTS OF 3KV AND 25KV PEDESTAL INSULATORS FOR SUPPORT ON OHE MASTS AND PORTALS
STANDARD ARRANGEMENTS OF MOUNTING OF NUMBER PLATES ON OHE STRUCTURES
STANDARD ARRANGEMENTS OF MOUNTING OF NUMBER PLATES (RETRO REFLECTIVE TYPE) ON OHE STRUCTURES
SCHEMATIC ARRANGEMENT OF REGULATED OVERHEAD EQUIPMENT
OHE FOLDER 7 REF 2
TYPICAL ARRANGEMENT FOR FIXING OF BRACKET ASSEMBLY ON 9.5m AND STRUCTURES SUITED FOR RAISING OF TRACK IN FUTURE
TYPICAL ARRANGEMENT OF OHE ON CANTILEVER MAST FOR DOUBLE TRACK SECTION
GENERAL ARRANGEMENT OF STITCH WIRE ON CATENARY
MASTS ON PLATFORM (BG)
DETAILS OF BRACKET ARRANGEMENTS ON TANGENT AND CURVED TRACKS
DETAILS OF BRACKET ARRANGEMENTS FOR OHE
MASTS ON PLATFORM (MG)
OHE FOLDER 8 REF 1
BOX TYPE CANTILEVER ARRANGEMENTS
ARRANGEMENT AT ANTICREEP
STANDARD CANTILEVER ARRANGEMENT FOR BOOM ANCHOR ANTICREEP LOCATION
SCHEMATIC ARRANGEMENT OF UNINSULATED OVERLAP (3 SPAN AND 4 SPAN OVERLAPS)
SCHEMATIC ARRANGEMENT OF INSULATED OVERLAP
SCHEMATIC ARRANGEMENT OF INSULATED OVERLAP
GENERAL ARRANGEMENT OF REGULATED OHE AT TURNOUTS (OVERLAP AND CROSSED TYPE)
GENERAL ARRANGEMENTS OF REGULATED OHE AT CROSS OVERS (OVERLAP AND CROSSED TYPE)
SINGLE BRACKET ASSEMBLY ON STRUCTURES AND DROP ARMS
SCHEMATIC ARRANGEMENTS OF UN INSULATED OVERLAPS (TYPE-I) (3 AND 4 SPAN OVERLAP)
OHE FOLDER 9 REF 1
ARRANGEMENT OF SHORT NEUTRAL SECTION
ARRANGEMENT OF NEUTRAL SECTION ASSEMBLY (PTFE TYPE) AT SWITCHING STATIONS
SCHEMATIC ARRANGEMENT OF UNREGULATED OVERHEAD EQUIPMENT
STANDARD TERMINATIONS OF OHE (REGULATED AND UNREGULATED)
GENERAL ARRANGEMENT OF UNREGULATED OHE AT TURNOUTS (CROSSED AND OVERLAP TYPE)
GENERAL ARRANGEMENTS OF UNREGULATED OHE AT CROSS OVERS AND DIAMOND CROSSINGS (OVERLAP AND CROSSED TYPE)
GENERAL ARRANGEMENT OF UNREGULATED OHE AT DIAMOND CROSSING
GENERAL ARRANGEMENT OF HEAD SPAN
GENERAL ARRANGEMENT OF PULL OFF
OHE FOLDER 10 REF 1
SCHEMATIC ARRANGEMENT OF TRAMWAY TYPE OHE (REGULATED) ETI/OHE/G/04203 DATED 22.06.1981
SPAN AND STAGGER CHART FOR TRAMWAY TYPE OHE (REGULATED) ETI/OHE/G/04201 DATED 18.06.1981
DRILLING SCHEDULE OF OHE MAST 8.50m LONG RSJ AND BFB FOR TRAMWAY TYPE OHE (REGULATED) ETI/OHE/G/04202 DATED 18.06.1981
DRILLING SCHEDULE OF OHE MAST 9.0m LONG RSJ AND BFB FOR TRAMWAY TYPE OHE (REGULATED) ETI/OHE/G/04202 DATED 18.06.1981
ARRANGEMENT OF BRACKET ASSEMBLY FOR TRAMWAY TYPE OHE (REGULATED) ETI/OHE/G/04204 DATED 18.06.1981
ARRANGEMENT OF ANTICREEP FOR TRAMWAY TYPE OHE (REGULATED) ETI/OHE/G/04205 DATED 18.06.1981
ARRANGEMENT AT ANTICREEP (ALTERNATIVE ARRANGEMENT) FOR TRAMWAY TYPE OHE (REGULATED) ETI/OHE/G/04206 DATED 18.06.1981
OHE FOLDER 11 REF 1
SMALL PARTS STEEL FOR SUPPOTING SECTION INSULATORS ASSEMBLY (FOR TRAMWAY OHE REGULATED) ETI/OHE/G/04207 DATED 07.09.1982
ARRANGEMENTS OF SECTION INSULATOR FOR TRAMWAY TYPE OHE (REGULATED) ETI/OHE/G/04207 DATED 18.06.1981
GENERAL ARRANGEMENTS OF TURNOUTS FOR TRAMWAY TYPE OHE (REGULATED) ETI/OHE/G/04208 DATED 18.06.1981
ADJUSTMENT CHART FOR TRAMWAY TYPE OHE (REGULATED) ETI/OHE/G/04209 DATED 26.09.1981
STANDARD TERMINATION OF TRAMWAY TYPE OHE (REGULATED) WITH PULLEY TYPE REGULATING EQUIPMENT (3:1 RATIO)
GENERAL ARRANGEMENTS OF CONNECTIONS AT SWITCHING STATIONS AND BT LOCATIONS (FOR TRAMWAY TYPE) ETI/OHE/G/04213 DATED 24.03.1994
IN SPAN JUMPER CONNECTION BETWEEN CATENARY AND CONTACT WIRE ETI/OHE/G/05101 DATED 15.01.1972
CONTINUITY JUMPER CONNECTION AT UN INSULATED OVERLAP ETI/OHE/G/05102 DATED 15.11.1983
CONNECTIONS AT TURNOUTS ETI/OHE/G/05103 DATED 15.01.1972
OHE FOLDER 12 REF 1
POTENTIAL EQUALIZER CONNECTIONS AT INSULATED OVERLAP AND NEUTRAL SECTION ETI/OHE/G/05104 DATED 15.01.1972
CONNECTIONS AT DIAMOND CROSSINGS ETI/OHE/G/05105 DATED 21.01.1972
ANTITHEFT JUMPERS ETI/OHE/G/05106 DATED 18.01.1987
GENERAL ARRANGEMENTS OF CONNECTION TO OHE BY COPPER CROSS FEEDER (150) ETI/OHE/G/05107 DATED 25.09.1987
GENERAL ARRANGEMENTS OF CONNECTIONS AT SWITCHING STATIONS ON DOUBLE TRACK SECTION BY COPPER CROSS FEEDER ETI/OHE/G/05122 DATED 25.09.1987
GENERAL ARRANGEMENTS OF CONNECTION AT SWITCHING STATION ON MULTIPLE TRACK SECTION BY COPPER CROSS FEEDER ETI/OHE/G/05123 DATED 25.09.1987
SUSPENSION OF 25KV FEEDER (SPIDER) ON OHE MASTS ETI/OHE/G/05143 DATED 21.01.1972
TERMINATION OF FEEDER RETURN CONDUCTOR AND RETURN CONDUCTOR (COPPER AND ALUMINIUM) ETI/OHE/G/05145 DATED 19.03.1993
OHE FOLDER 13 REF 01
SUSPENSION ARRANGEMENT OF ALUMINIUM RETURN CONDUCTOR (SPIDER) ON TRACTION STRUCTURES ETI/OHE/G/05307 DATED 10.01.1978
SUSPENSION OF RETURN CONDUCTOR (SPIDER) FROM BOOMS OF STRUCTURES ETI/OHE/G/05311 DATED 22.06.1976
SUSPENSION OF RETURN CONDUCTOR (SPIDER) FROM BOOMS OF STRUCTURE (WITH CLEVIS TYPE DISC INSULATOR) ETI/OHE/G/05312 DATED 03.05.1989
CONNECTIONS BETWEEN OHE AND ALUMINIUM RETURN CONDUCTOR AT BOOSTER STATIONS ETI/OHE/G/05413 DATED 05.06.1972
GENERAL ARRANGEMENT OF EARTH WIRE ON OHE MAST ETI/OHE/G/05201-1 DATED 20.06.1994
ARRANGEMENT OF TRANSVERSE BONDS ETI/OHE/G/05251 DATED 08.02.1972
CONNECTION OF RETURN CONDUCTOR TO TRACK ETI/OHE/G/05306 DATED 04.04.1979
ASSEMBLY OF SECTION INSULATOR RE/33/G/05181 DATED 15.07.1966
GENERAL ARRANGEMENT OF EARTH WIRE ON OHE MAST ETI/OHE/G/05201 DATED 31.05.1973
OHE FOLDER 14 REF 1
MOUNTING OF 25KV ISOLATORS ON OHE STRUCTURES (GENERAL ARRANGEMENT) ETI/OHE/G/05513 DATED 28.06.1969
MOUNTING OF 25KV ISOLATORS ON OHE STRUCTURES (GENERAL ARRANGEMENT) ETI/OHE/G/05513A DATED 28.06.1969
DETAILS OF SMALL PARTS STEEL WORK FOR SUPPORTING 25KV ISOLATOR ON NEW TTC BOOM ETI/OHE/G/05513 DATED 06.09.1968
CONNECTION FROM ISOLATOR TO OHE ETI/OHE/G/05516 DATED 30.07.1992
MOUNTING ARRANGEMENT OF AUXILIARY TRANSFORMER ON OHE MAST ETI/OHE/G/05522 DATED 30.01.1992
CHARACTERISTICS OF CONDUCTOR/BUS BAR FOR 25KV AC TRACTION ETI/OHE/G/05600 DATED 25.06.1973
OHE FOLDER 15 REF 1
SUSPENSION ARRANGEMENT OF AT FEEDER ON TRACTION MAST FOR 2X25KV ETI/OHE/G/06000 DATED 23.10.1989
SUSPENSION ARRANGEMENT OF AT FEEDER ON PORTALS FOR 2X25KV ETI/OHE/G/06001 DATED 23.10.1989
SUSPENSION ARRANGEMENT OF 25KV FEEDERS AT SWITCHING STATIONS/FEEDING POSTS (FOR 2X25KV) ETI/OHE/G/06002 DATED 23.10.1989
TERMINATION ARRANGEMENT FOR AT FEEDER ETI/OHE/G/06003 DATED 23.10.1989
ARRANGEMENT OF SECTIONING OF AT FEEDER (FOR 2X25KV) ETI/OHE/G/06004 DATED 23.10.1989
MOUNTING DETAILS OF DOUBLE POLE ISOLATOR ON MAST (FOR 2X25KV) ETI/OHE/G/06005 DATED 28.11.1991
GENERAL ARRANGEMENT OF CONNECTIONS AT AN ELEMENTARY SECTIONING POINT OF AN DOUBLE TRACK SECTION (FOR 2X25KV) ETI/OHE/G/06005 DATED 28.11.1991
SUSPENSION OF AT FEEDER (SPIDER) FROM BOOM OF PORTALS (FOR 2X25KV AT SYSTEM) ETI/OHE/G/06006 DATED 28.09.1993
MOUNTING DETAILS OF DOUBLE POLE ISOLATOR ON PORTALS (2X25KV) ETI/OHE/G/06008 DATED 13.10.1992
OHE FOLDER 16 REF 1
SPAN AND STAGGER CHART ETI/OHE/SK/124 DATED 09.07.1973
DROPPER SCHEDULE FOR INSULATED OVERLAP SPAN ETI/OHE/SK/148 DATED 22.11.1974
ARRANGEMENT OF ENDURANCE AND PROOF LOAD TEST OF REGULASTING EQUIPMENT (WINCH TYPE) ETI/OHE/SK/467 DATED 06.08.1984
BRACKET ARRANGEMENT ON TANGENT TRACK INSIDE TUNNEL ETI/OHE/SK/473 DATED 05.08.1985
BRACKET ARRANGEMENT ON CURVED TRACK INSIDE TUNNEL ETI/OHE/SK/473 DATED 05.09.1985
DETAILS OF BRACKET ARRANGEMENT INSIDE TUNNEL ETI/OHE/SK/473 DATED 05.09.1985
OHE FOLDER 17 REF 1
DROPPER SCHEDULE FOR OVERLAP SPANS ETI/OHE/SK/522 DATED 05.02.1988
DROPPER SCHEDULE FOR ANCHOR SPANS ETI/OHE/SK/523 DATED 05.02.1988
COUNTER WEIGHT ASSEMBLY ETI/OHE/SK/524 DATED 05.02.1988
STRAIN CLAMP FOR ZEBRA CONDUCTOR ETI/OHE/SK/531 DATED 11.07.1988
OHE FOLDER 18 REF 2
TYPICAL SECTIONING DIAGRAM AT STATIONS WITH ISOLATORS FPOR 2X25KV ETI/OHE/SK/544
ARRANGEMENT OF NEUTRAL SECTION FOR CONVERSION WITH SHORT NEUTRAL SECTION ETI/OHE/SK/551 DATED 22.07.1990
ARRANGEMENT OF SHORT NEUTRAL SECTION AT EXISTING FEEDING POST ETI/OHE/SK/552 DATED 24.01.1990
SAG AND TENSION CHART FOR CATENARY (65Sq mm) AND CONTACT (107 Sq mm) (1200+1200Kgf tension) ETI/OHE/SK/581 DATED 17.10.1993
SCHEMATIC ARRANGEMENT OF UNINSULATED OVERLAP (1 AND 4.5 SPAN OVERLAP) ETI/OHE/SK/582 DATED 17.12.1993
SCHEMATIC ARRANGEMENT OF INSULATED OVERLAP ETI/OHE/SK/583 DATED 17.12.1993
DROPPER SCHEDULE FOR REGULATED OHE (1200Kgf+1200Kgf) ETI/OHE/SK/584 DATED 17.12.1993
OHE FOLDER 19 REF 1
SAG AND TENSION CHART (FOR HIGHER SECTION OHE) ETI/OHE/SK/605 DATED 22.11.1994
DROPPER SCHEDULE FOR UNINSULATED OVERLAP SPAN (1200+1200 Kgf ) TENSION ETI/OHE/SK/585 DATED 17.12.1993
DROPPER SCHEDULE FOR INSULATED OVERLAP SPANS (1200+1200 Kgf) TENSION ETI/OHE/SK/586 DATED 17.12.1993
COUNTER WEIGHT ASSEMBLY ETI/OHE/SK/587 DATED 17.12.1993
COUNTER WEIGHT EYE ROD ETI/OHE/SK/588 DATED 17.12.1993
TYPICAL PNEUMATIC CIRCUIT FOR RAISING/LOWERING OF PANTOGRAPH FROM CAB OF OHE RECORDING CUM TEST CAR ETI/OHE/SK/597 DATED 11.02.1994
SCHEMATIC ARRANGEMENT OF UNINSULATED OVERLAP (3 SPAN AND 4 SPAN) ETI/OHE/SK/603 DATED 30.11.1994
SCHEMATIC ARRANGEMENT OF INSULATED OVERLAP (3 SPAN AND 4 SPAN) ETI/OHE /SK/604 DATED 30.11.1994
OHE FOLDER 20 REF 1
DROPPER SCHEDULE FOR REGULATED OHE (FOR HIGH SECTION OF OHE) ETI/OHE/SK/606 DATED 22.11.1994
SCHEMATIC ARRANGEMENT OF UNINSULATED OVERLAP ( 3 SPAN AND 4 SPAN) ETI/OHE/SK/607 DATED 22.11.1994
SCHEMATIC ARRANGEMENT OF INSULATED OVERLAP (3 SPAN AND 4 SPAN) ETI/OHE/SK/608 DATED 22.11.1994
SCHEMATIC ARRANGEMENT OF UNINSULATED OVERLAP (3 SPAN AND 4 SPAN) ETI/OHE/SK/609 DATED 22.11.1994
SCHEMATIC ARRANGEMENT OF INSULATED OVERLAP (3 SPAN AND 4 SPAN) ETI/OHE/SK/610 DATED 22.11.1994
OHE FOLDER 22 REF 2
HIGH TENSILE RUSTLESS U BOLTS DIA 10mm ETI/OHE/P/150 DATED 19.09.1974
RAIL JUMPER FERRULE RE/33/P/504 DATED 01.09.1959
HIGH TENSILE RUST LESS PIN (DIA 10 mm) RE/33/P/160 DATED 01.06.1965
STEEL U BOLT DIA 14mm RE/33/P/250 DATED 27.05.1965
SNAP HEAD PIN (DIA 20mm) RE/33/P/260 DATED 27.05.1965
RAIL JUMPER ASSEMBLY RE/33/P/500 DATED 01.01.1959
RAIL JUMPER CLAMP BODY GRIP SCREW AND FERRULE NUT RE/33/P/501 DATED 01.09.1959
OHE FOLDER 23 REF 2
DETAILS OF CONTACT WIRE STRAIGHTENER ETI/OHE/P/581-599 DATED 11.03.1978
RAIL JUMPER EXTENSION RE/33P/509 DATED 06.05.1960
EARTHING RODS RE/33/P/510 DATED 05.11.1959
EARTHING ROD RE/33/P/511 DATED 05.11.1959
EARTHING ROD HOOK ASSEMBLY RE/33/P/520 DATED 24.01.1961
EARTHING ROD HEAD RE/33/P/521 DATED 24.01.1961
INSULATED TEE JUNCTION RE/33/P/530 DATED 22.01.1961
EARTHING ROD TONGUE RE/33/P/522
AUTOMATIC COME ALONG CLAMP (FOR CONTACT WIRE) RE/33/P/550 DATED 22.01.1962
EARTHING ROD HOOK PIN AND OTHER PARTS RE/33/P/523 DATED 06.01.1961
AUTOMATIC COME ALONG CLAMP RE/33/P/560 DATED 25.06.1965
CONTACT WIRE STRAIGHTENER ASSEMBLY RE/33/P/580 DATED 11.03.1970
OHE FOLDER 24 REF 2
TERMINAL CONNECTOR (19mm) MULTIPLE HOLE (BOLTED TYPE) ETI/OHE/P/1009 DATED 01.10.1993
TERMINAL CONNECTOR (15mm) MULTIPLE HOLE (BOLTED TYPE) ETI/OHE/P/1010 DATED 06.04.1994
PARALLEL CLAMP (157- 65/107/150) ETI/OHE/P/1030-3 DATED 23.08.1991
CONTACT WIRE PARALLEL CLAMP PART LARGE ETI/OHE/P/1031-2 DATED 05.04.1969
TERMINAL CLAMP (15mm) COMPRESSION TYPE TI/DRG/OHE/FTGNF/RDSO/0001/02/0 DATED 22.11.2002
TERMINAL CLAMP (19mm) COMPRESSION TYPE TI/DRG/OHE/FTGNF/RDSO/0002/02/0 DATED 22.11.2002
OHE FOLDER 25 REF 2
PARALLEL CLAMP (90/50) ETI/OHE/P/1040-3 DATED 24.10.1994
PARALLEL CLAMP (150-105/150) ETI/OHE/P/1050-2 DATED 08.07.1971
PARALLEL CLAMP (150/160) ETI/OHE/P/1050-3 DATED 01.10.1993
PARALLEL CLAMP (150-105/150) ETI/OHE/P/1051-2 DATED 05.04.1969
BRIDLE WIRE CLAMP (6mm) ETI/OHE/P/1070-1 DATED 22.09.1992
CONTACT WIRE SPLICE (TOOTHED TYPE) ETI/OHE/P/1080-1 DATED 26.08.1976
CONTACT WIRE SPLICE (107 Sqmm) ETI/OHE/P/1080 DATED 28.07.1971
CONTACT WIRE SPLICE PART ETI/OHE/P/1081-1 DATED 13.09.1976
CONTACT WIRE SPLICE PART ETI/OHE/P/1081-2 DATED 17.04.1986
CATENARY SPLICE (65 Sqmm) ETI/OHE/P/1090 DATED 29.06.1971
OHE FOLDER 26 REF 02
CATENARY SPLICE SLEEVE ETI/OHE/P/1091 DATED 29.06.1971
CATENARY JOINT SOCKET ETI/OHE/P/1092 DATED 29.06.1971
CATENARY JOINT SOCKET LEFT ETI/OHE/P/1093 DATED 29.06.1971
CATENARY JOINT CONE ETI/OHE/P/1094 DATED 30.06.1971
FEEDER JOINT SOCKET ETI/OHE/P/1102 DATED 03.10.1972
